CETETHERM PIONEER
The fourth generation
Heat Interface Unit
Cetetherm has extensive experience in district heating technology and with the future in mind has developed Cetetherm Pioneer with
well-thought-out functionality and a focus on being user friendly,
both during installation, optimiziation and service.
The new Cetetherm Pioneer is the fourth generation Heat Interface Unit, a ground-breaking heating system for Family homes and apartments. An energy-smart, environmentally-friendly Heat Interface Unit for heat and hot water, which comes in a compact and
stylish design.
Cetetherm Pioneer can be remotely controlled and energy optimized via Cetetherm myUplink, an app, which is suitable for family homes and apartments that are directly connected to a network or
a district heating network.
Cetetherm Pioneer a
BESA and Reg4
registered product
Climate smart - Energy efficient
- High comfort
Cetetherm Pioneer is a connectable Heat Interface Unit that is compatible with several heat sources. Cetetherm Pioneer is easy to place, install, monitor and service.
You can also expect benefits such as:
- Supply temperature of 55-65°, which means Cetetherm Pioneer is compatible with several energy sources such as district heating and heat pumps. The possibility of using low supply temperatures results in very low energy losses and is also an optimal temperature for, for example, a secondary network
- Market leading domestic hot water control with built-in-energy-optimized idle function
- The BESA test* shows the market´s lowest return temperature
- Energy efficiency that provides low costs - both during operation and consumption
- Low climate impact
- User friendly room panel with real time operating data. Controller included as standard
- Smartphone app/webb for remote control, optimization and monitoring
- Heat pump ready
- High comfort and pleasant indoor climate
- Minimal maintenance and long lifespan - prepared for serviceability
- Pre-pay ready
Read more about Pioneer´s smart functions on our website,
in the Product brochure Pdf, 2 MB. or in Pioneer´s Product sheet
Remote energy optimization with Cetetherm myUplink
With the app Cetetherm myUplink you will get a quick view of the Heat Interface Unit´s status, regardless of where you are.
Cetetherm myUplink for consumers can control the heat in the home with an app for an easier everyday life. You provides a quick overview of the status of the Heat Interface Unit and heating in the home. It makes it easy to follow and control the heat and hot water production and temperature. In the event of operational disruptions, you will receive push nofications. And it´s compatible with Google Home.
Cetetherm myUplink PRO is a service developed for energy suppliers, property owners and service companies, which provides great opportunities for high comfort for customers.
Once the customers are connected, you can remotely monitor heating and hot water temperature and flowrates, primary temperatures and pressures. You got access to alarm and history. In the event of operational disruptions, you can easily communicate with customers via push notifications.
Connectivity
API - Ready
API is used to retrieve data for communication between programs, systems and applications, to facilitate functionality and use data efficiently.
Modbus RTU Serial Communication
Modbus provides the possibility to read values and sensors from HIU´s. 246 units can be connected and monitored on the same Modbus.
Google Home
Connects via myUplink to Google Home.
Cloud Software Upgrade
Upgrade takes place via cloud services.
Cloud - myUplink - Consumer
myUplink app is cloud connected and provides the opportunity to distance log values, view and adjust indoor temperature and set "Home/Away" mode.
Cloud - myUplink PRO - Company
myUplink app is cloud connected and enables energy suppliers, property owners and service companies to monitor mutiple installed HIU´s. Can read all values and sensors.
Their choice was Cetetherm Pioneer
Easy, sustainable and stylish
When the Haglund family´s heating pump was a few years old it was time to start thinking about either replacing the heat pump or the heat source. Since the energy company already had prepared for district heating in the residential area, they started to read about district heating and soon understood that it was the alternative they wanted to go for.
- The environmental aspect is a large part in the choice of district heating. It´s sustainable and mostly comes from renewable energy. We also wanted a more stable heating cost, says Helena Haglund from Hässleholm in Sweden, who has the fluctuating electricity prices of recent winters fresh in mind.
The first installation of Cetetherm Pioneer was made in the autumn 2023 in a residential area in Hässleholm in Sweden. The Haglund family lives in an area that has district heating prominently, but Haglunds have had a heat pump for a long time.
- When district heating was introduces in our area, we had recently invested in a heat pump, so at that time it wasn´t relevant to connect to district heating, says Helena Haglund.
Now a few years later when the heat pump was getting a bit old, the Haglunds started to think about the next heat source and district heating came up. This thanks to the environmental aspect as district heating is sustainable and comes from renewable energy and surplus energy from recycled garbage, wood chips and waste heat. Another aspect was the fluctuating electricity prices from previous winters, they wanted a slightly more stabile heat cost than before. On the positive side, the reduces carbon dioxide emissions and relief from the electricity grid also ended up. After reading and deciding on district heating, the Haglunds started to look around for alternatives to district heating units. They do not have space for a large unit.
- We talked to neighbors and suppliers and looked for alternatives ourselves and found Cetetherm Pioneer, which suits us perfectly. It´s not just small, compact and fits in our small space in the basement, it´s actually pretty good looking too. I could even imagine to have it in the laundry room if needed, says Helena Haglund, with a smile.
The installation was made by Magnus from IVAB, Infjärdens Värme AB in Hässleholm, Sweden, who have never previously before installed such a small and smart unit.
- It´s the first unit in that small format I´ve installed so far, but it won´t be the last.The installation went very smothly and easily, says Magnus. - I often hear from customers that the units are not very attractive and takes an unnecessery amount of space. Pioneer is a perfect option for one-family houses and apartment buildings, so I will recommend the customers to take a look at Pioneer when it´s time to install a new or replace their district heating unit, concludes Magnus.
It was not only the size, design and energy efficiency that made their decision for Pioneer, they also want to be able to follow up and control their heat in an easy way. With Pioneer they can control the temperature in the house and hot water via an app in the smartphone, whether they are at work or in their summer house during a long stay. At the same time as they do the environment a favor.
Cetetherm heating a new generation
Regardless which type of building, regardless of the number of residents, working or visitors. Regardless of energy source and regardless of where in Europe the customers are located - Cetetherm makes a difference for the customers, and their customers, every day through energy-efficent and high-tech solutions and products for district heating and cooling.
Contact us for more information on how we are heating a new generation
